Light Bulb info for 260
 

Cuddy bulkhead swivel lights, what bulbs are they and how do you replace them ?

Should a bi-pin or G4 base. Just pull pulb straight out. Sometimes one of the will come loose from buld and can be removed with plyers . Shut batteries off!!

Thanks DBO, that was an old post that nobody jumped on so I went ahead a just did it on the fly. Covered in my MOD's thread.

No worries. I just added some LED lights in my cockpit and getting ready to change out the bulds in the cabin. Found a good selection @ marineledshop.com for what it's worth. I woud post but guess I need to upgrade membership.

You can post pics at your member level, (same as mine).....:)

I can't figure out how to post pics. I don't see how to add attachments. Any thoughts?

You'll need to upload your photos to a site like "PHOTOBUCKET", once in there you can copy the entire "IMG" link and paste it into your post, bingo your pic has been posted. I'm sure there is a YouTube video available as well so look that up too.
Example below from Photobucket site:

http://i177.photobucket.com/albums/w...e.jpg~original

Let me work on that.will post pics if and when I can.

Over the weekend i got the LED bulbs put in the cabin. LOOKS AWESOME !! I changed out the bulbs in the round lights ( two on the side wall,two directly above the cup holder) with blue LED. worked out great. I was also considering adding more lights to the cockpit as there is only one under the bench seat. I changed the bulb out for LED and WOW. No need to spend the additional time running wire and installing more lights. The new LED did the trick.:ernaehrung004 Still working on Photobucket so I can upload pics.

pics[IMG]http://i1268.photobucket.com/albums/...psrq3rpxml.jpg[/IMG]