First two runs of the VR1 after repowering
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Long Island NY
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
First two runs of the VR1 after repowering
2005 Velocity VR1 Race hull. 604"/860hp Lab Racing Engines built Single Carb.1350 Holley, No Blower,
Imco Marine SCX upper/SC lower,1.34s. 2"short.
Hydromotive Engineering 28P5-30P5X.
28P5 104mph@5500=4% Slip.
30P5X 107mph@5600+10% Slip. Super flat water wind from the side. Think there is 5 more in it.
Imco Marine SCX upper/SC lower,1.34s. 2"short.
Hydromotive Engineering 28P5-30P5X.
28P5 104mph@5500=4% Slip.
30P5X 107mph@5600+10% Slip. Super flat water wind from the side. Think there is 5 more in it.
#4
Registered
Thread Starter
Join Date: Oct 2000
Location: Long Island NY
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
That was my 02 hull
I split it down the keel and was selling it as a project and no one wanted it. So I scrapped it. And bought the 05 and rigged it with everything from the 02
#5
Registered
2005 Velocity VR1 Race hull. 604"/860hp Lab Racing Engines built Single Carb.1350 Holley, No Blower,
Imco Marine SCX upper/SC lower,1.34s. 2"short.
Hydromotive Engineering 28P5-30P5X.
28P5 104mph@5500=4% Slip.
30P5X 107mph@5600+10% Slip. Super flat water wind from the side. Think there is 5 more in it.
Imco Marine SCX upper/SC lower,1.34s. 2"short.
Hydromotive Engineering 28P5-30P5X.
28P5 104mph@5500=4% Slip.
30P5X 107mph@5600+10% Slip. Super flat water wind from the side. Think there is 5 more in it.