|
I just have a piece of aluminum U channel about 6" long that's wide enough for the lift rod to fit in. drill holes in each end at least an 1" from the end and put a quick release pin in each end. The advantage of this over the Hardin device is that you can get the U channel to lock in the upright position which gives me more room to work.
|
Originally Posted by ThisIsLivin
(Post 4792177)
I just have a piece of aluminum U channel about 6" long that's wide enough for the lift rod to fit in. drill holes in each end at least an 1" from the end and put a quick release pin in each end. The advantage of this over the Hardin device is that you can get the U channel to lock in the upright position which gives me more room to work.
Thanks, Padraig |
|
That is It!
Thanks!!! Padraig |
It's a good design. Can lift sun pad up enough to pin if needed.
|
| All times are GMT -5. The time now is 01:34 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.