Do any 41 owners have suggestions regarding the best props for a 41?
Boat is a '98 and will have 750hp-800hp side, and use Bravo 1's - 1.5's with Imco components. The motors should be ready in a couple of weeks.
I have a pair of 30 pitch Hydromotive Quad IV's (non-labbed), but by my calculations I think the boat will need 32-34 pitch. Any real world experience would be appreciated.

Thanks,

I really like the performance of labbed Bravo 1s over the Hydros on my 41. In fact I sold my two sets of labbed Hydros last year. I have about 600 hp/side and I'm running labbed 28s to 5500 rpm. I'm planning on trying a set of 30s to get the rpms down a little.

i am running 32 bravo i's w/ 1.50 gears, i have 502 efi's with m-3 pro chargers with approx. 700-740 h.p. they have been labbed, and i am turning them 5400 rpm. any questions give me a call.

JOEL ROSS 571 238 7667

I am guessing that with 750 to 800 hp you will need about a 30 bravo 1 or a labbed 32 bravo 1. I have a set of labbed 30's (by Halls) and a set of labbed 28's pushed to 30's that are race cut (by Halls) that came off Dick Farmer's 41 (about 775hp ea. that he traded in on my 28p 5blade hydro's) and a set of stock 32 (new) bravo 1's if you need some.
30's labbed --- $800 w/hubs
28/30's labbed race cut---$700
32 stock (new)----$600 w/hubs
Steve----704-239-1410

Steve I have a set of 29s and 30s from mike . I nead a set of 29/30 5 blades!

Thanks for the feedback. Sounds like 32's are going to be the best place to start.

What Kind of speed are you guys running I have same boat Kevlar hull same power running about 92 mph

Tom, I traded my 5blade hydro's to Dick Farmer. I guess right now though, you do not need any props huh??? Your boat was on the lake here 2 weekends ago. What's next??