I get my prop back on Friday, it will be a 10 day turn around, 9 of those days were shipping. Auggie turned it around in the same day received it and shipped it out. I'll be installing the prop Friday night and using it all weekend. I will let eveybody know how it works. $30 shpping out and $30shipping it back total cost including shipping $210. So they quoted $175 but only charged $150. I know the numbers just as I did back in the spring I wrote them down. When Brett's staff quoted me a new higher price, I was pissed and didn't write it down as I had no intentions of paying it. Prehaps it was all a misscommunication, as Bblades has a great reputation. Eitherway This thread isn't about Bblades, it is about Cutting Edge, They provided services at a very resonable price and will post the GPS results and RPM increase due to Cutting Edge's work. Look for a post from me on Monday

cutting edge lab'd prop
 

ok I got the prop I'm now spinning 200 rpm faster and going a soild 65-66 mph with 2 people and 3/4 tank of fuel.

so you picked up 2-3 solid mph along with a 200 rpm increase, nice! I sent CUTTING EDGE a 30 pitch merc labbed that ran 92-93 most of the time, 94 a couple times and saw 95-96 afterwards at about the same rpm, was real happy with there work!! Greg was a nice guy to deal with, sorry he is gone but if he was just the salesman and pitch guy and you can still have the same guy do the work then it sounds like a good deal, Smitty

I'm really exicited to see what speed I'm gonna get, with the exhaust open, I had it closed cause of a noise ordinance, plus getting the fuel down to 1/2. I'm hoping for 66 to 68? Will see

I did see 68 mph at 1/2 to 1/4 tank and 2 people. I also saw 66 with 6 people and 1/2 fuel. Boat airs out nice and I love the prop. I'm planning to buy another prop from them and and have them try for alittle more may 1 mph? I'm very happy with them and they have a customer for life.

Cutting Edge, they under promise and over deliver