WTB Transom Rings
 

I need four transom rings with rubber gasket for a 4 1/2" exhaust pipes. Thats Scott

These are hard to find. I'm looking for the same thing. Would be nice to have new rings and gaskets but I would settle for just new rubbers. Good luck! If I find a source, I'll post again.

Rob...

CP performance has them in their catalog, if this is what you guys are talking about.

http://www.cpperformance.com/SearchResult.aspx?CategoryID=186

Where getting warmer. The gaskets I need are 4-1/2 ID x 7-1/2 OD by 3/8" thick.

Rings are 5-1/2 ID x 7-1/2 OD. Hey Scott - Are these the same ones you're looking for?

By the look of my currently burned gaskets the new ones need to be heat/flame resistant.

CP's catalog doesn't show these sizes. I'll give them a call to verify. Thanks for the info.

-Skramer- Not trying to cut in on your thread , but I will be looking for a pair for 4" tails soon.... So if anybody has or knows of any 4" I would be interested as well

I found a company in LA area that cuts custom rubber pieces. They quoted me $37 ea. for the gaskets made from viton (sp?). I Guess this stuff is the cats meow for flame resistance. About 5 time the cost of silicone rubber. My only concern is that I have 3/8 thick gaskets and they only have 1/4".

Scott, How thick are your existing gaskets?

And, did you find a hook up?

I found a local guy who is making the rings for me. I was going to use my old rubber gaskets I think they will work. They are 1/8th" think.

I guess I can't go wrong with 1/4" then.

If you don't mind me asking is he making the same rings as shown above. If so how much?

My rings will polish up. Was thinking about puting them on the inside as well.

ALL SEASONS MARINE, got me some really, that I thought came from Imco.They opened up my trim rings and polished them, and made me gaskets. Give them a call, 1-702-293-4499, they are great guys.