Hynautic steering cylinder
#1
Registered
Thread Starter
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
Hynautic steering cylinder
I am looking to buy at least 1 Hynautic steering cylinder. I would consider buy a set. I had one of my current cylinders develop a crack in the housing.
Thanks,
Magic Medicine
Thanks,
Magic Medicine
#4
Registered
Thread Starter
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
Here are a few pics, The I took the 4 bolts off when I disassembled from the boat.
The cylinder has K5 B 7776 stamp on the Hynautic label
The cylinder measures 26 3/4" fully extended
and 17 1/2" fully compressed
The cylinder has K5 B 7776 stamp on the Hynautic label
The cylinder measures 26 3/4" fully extended
and 17 1/2" fully compressed
#5
Banned
Gold Member
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
We have a customer interested in converting his system to a full hydraulic and he already has those cylinders. Does anyone know if they are rated for full hydraulic pressure with the pump in the system?
We can't locate info on them.
Please email me at [email protected]
Thank you,
Kirk
We can't locate info on them.
Please email me at [email protected]
Thank you,
Kirk
#6
Registered
Thread Starter
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
We have a customer interested in converting his system to a full hydraulic and he already has those cylinders. Does anyone know if they are rated for full hydraulic pressure with the pump in the system?
We can't locate info on them.
Please email me at [email protected]
Thank you,
Kirk
We can't locate info on them.
Please email me at [email protected]
Thank you,
Kirk
#8
Gold Member
Gold Member
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,373
Likes: 0
Received 87 Likes
on
35 Posts
I have a helm unit and two external rams if anybody wants to due some trading.....I need a colume shaft for a full hydralic helm........Here is some pics of what i have...
I have went with latham full hydraulic and i need the colume shaft.....You can have my whole hynautic system for the colume shaft....
I have went with latham full hydraulic and i need the colume shaft.....You can have my whole hynautic system for the colume shaft....
Last edited by nocigarette; 04-25-2008 at 09:21 AM.