Looking for A 1/2" Bravo Spacer Kit. Straight Bravo One, not and xr.

Thanks!

http://www.offshoreonlyclassifieds.com/one_pair_of_bravo_1_2_spacers-o23637-en.html

i have a set of one inch spacers with studs and couplers

I just need one. Pm me with a price. I suppose trying a 1" might be helpful.

Thanks!

Jayhawk, are you running a shorty? What's your X? Just curious.

My drive is a stock length Bravo 1. I haven't measured the X, but I have compared drive depth with DaveM here on the board with us both measuring from the bottom of the gimbal housing to the keel. I am about 1/4" shallower than Dave.

As it stands, I think I am going to have to try spacers and shorties with an assortment of props to see what gives me the best result. Right now I have a best of 76 with a 501hp engine in a 24 step bottom Super. I think I am at least 4mph slow.

I'm hoping the spacer will help with getting the bow up some. When I am running wot, it feels like the bow is pointing down. I don't feel any bow lift.

Ttt

Hi JayHawk,
I have 1" Bravo spacer with studs and coupler if your still in the market ?
I would take $275. if enterested.
cell ph. 559 647-2882 Darren