Anybody have one to cut loose? A know a person looking for one

what kind of internals are they looking for?

He has a cruiser that the block frooze, just a rotating short block.

I'll keep an eye out........if you find a 5.0 merc block let me know. I have an employee who let his freeze too.

I've got a low hour 7.4 MPI that I will let go cheap, pm if you think he would be interested.

Iv got plenty of bare 454 blocks. If the block cracked from freezing than the internals are more than likely still good. You can send me your short block and I can transfer the internals into the new block with new rings and bearings or I can put a new rotating assembly in this block. I will sell the block for $600. The block and installing you internals for $1200 or the block and a new rotaing assembly (Cast crank, forged rods, Hypereutectic pistons) balanced and assembled for $2300. Give me a call Jeff @ J&J Marine 856-228-4744 jjmarineperformance.com

Do you want a bare block or a short block assembled I have both. One peice or two peice main seal?

He's pulling the rest of the motor down this weekend......pretty sure he only needs a bare block since his father has built race motors and will assemble whatever he buys. He's hoping the internals will be fine to re-use. 2004 typical Merc 5.0, don't know if it's 1 or 2 piece main seal.
Prices for just a block???
Thanks,