Wanted Pair of 10-71's or Whipples
10-09-2009 | 02:49 PM
#1
Thread Starter
Registered
Joined: Dec 2000
Posts: 1,239
Likes: 5
From: Loto, MO
Wanted Pair of 10-71's or Whipples
Looking for a pair of 10-71's or Whipple 3.3's.
Prefer complete setup - intake (tall deck) to flame arrestor. Will consider seperate pieces.
Rick 847-502-2399
Prefer complete setup - intake (tall deck) to flame arrestor. Will consider seperate pieces.
Rick 847-502-2399
10-09-2009 | 02:56 PM
#2
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Rick how much more power are you trying to get?
with the 10/71 is there a clearance prob with the dist?
On the 3.3 I have the parts list for a Whipple 500efi to make sure ya get the main pieces.
with the 10/71 is there a clearance prob with the dist?
On the 3.3 I have the parts list for a Whipple 500efi to make sure ya get the main pieces.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
10-14-2009 | 07:09 PM
#8
Platinum Member
Joined: May 2003
Posts: 667
Likes: 0
From: Metairie, La.
10-15-2009 | 07:27 AM
#9
Thread Starter
Registered
Joined: Dec 2000
Posts: 1,239
Likes: 5
From: Loto, MO
Would you be in a pair of 2.3 Quad's I can provide the intake up complete.
[email protected]
[email protected]
Dave and Mark, yea those would work. Do you know of a used set cheap or are you just teasing.... I think I know the answer.
10-15-2009 | 09:39 AM
#10
Registered
Joined: Feb 2002
Posts: 6,656
Likes: 20
From: Lake Michigan
Don't know of any used or discounted but I know if there are some you'll find them...
Glad to see your going the next step with that bad boy.
Again, its the best and cleanest rigging if ever seen.
Glad to see your going the next step with that bad boy.
Again, its the best and cleanest rigging if ever seen.
Last edited by Back4More; 10-15-2009 at 09:42 AM.
