Anybody have any of these? The mounts that bolt to the sides of the trannies, then get thru bolted to the inner transom plate? For a ssm III/IV setup

http://www.mercruiserparts.com/Show_Pictures3.asp?dnbr=809478 93&ivar=images/CRUISER/809478.93/30.png&inbr=2045&bnbr=30&bdesc=TRANSMISSION+%28DRI VELINE%29

I have 2 pairs. Excellent condition with all bolts to mount to transmissions and mount to inner transom plates (springs, washers, etc.)

I paid around $800 for all of it about 5 years ago. Asking $450 plus shipping.

Thanks,
Doug

Its so strange. I have the same exact ears, but without the bushings in them. Ordered the bushings, but they wont press in. Looks as if the ears werent machined properly or something. Strange.

Anyhow, my buddy is checking to see if his guy has some locally. If not, i will prob take these off your hands.

Joe, don't you have rear engine plates ?? Do you have the plug in style trannys ??

No rear plates...do have plug in trannies though

Joe, put in the rear engine plate, then you won't have to bother with the ears on the trannys.

Is there any advantage to the rear plate over the ears? I think to go to plates I'll have to order them from hardin marine or someone, then machine bellhousing down so starter works? I think that should be it right?