I have the later style swept-back Bravo XR with the finned top cap. I also have the steering kit for it (KPLT-7914).

I need the studs ONLY from this kit and wondered if anyone had them laying around. You probably won't want to separate them from a kit but if you have them and you want to sell, please contact me.

I do NOT need washers, nuts or anything else out of the kit.


Thanks!
Jason

http://lathammarine.com/st1a.htm#1

I might have some......I switched to "finned" top caps and made the spacers/bolts to lift the top portion of that kit you have. It's been awhile but I think I have an extra set of the bolts I made. They are actually made to length from S.S. threaded rod I ordered...it was the only way I could get what I needed. Ran the boat for 3 years with this set-up before selling it a year ago.

I very much appreciate your response and effort! However, I'd rather pay someone for them even Latham if I have to.

I can make them just like you did but they won't be as "pretty". I'm a little too picky I suppose. Marshalls here in SD has stainless round stock but I'm looking to get the ones that came from Latham. Probably will have to order Monday.. Thanks again!

Well, Ive been looking through my stuff. I was positive I had a bunch of these. I found 2 that look new (with washer and spacer) so there has to be more of them somewhere.