wanted 360 Chry heads
#1
Registered
Gold Member
Thread Starter
Join Date: Dec 2010
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
wanted 360 Chry heads
I need a set of Chrysler 360 heads old set are from a 1984 F32 Trojan. I have a set at the machine shop that have bad Cracking in the combustion chambers. non repairible.
any help.
any help.
#6
Registered
I am by no means an expert on Chrsler heads... are they marine specific? If not give Sean Donley at 3C Salvage a call. They usually have quite a bit of Mopar stuff. He's up in wooster...
I'll pm you his number.
I'll pm you his number.
#8
Registered
Gold Member
Thread Starter
Join Date: Dec 2010
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
I don't believe so, only thing is watch the casting numbers. There are some early ones floating around out there without hardened exhaust seats. 360s are also different from small port 318 too. Oh and make sure they aren't for the newer "magnum" series engines either.
#9
Registered
Join Date: Jan 2010
Location: Folsom CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
I have a pair,casting #3233344,I also have a fresh short block bored .030 over.Came out of a 1986 Wagoneer, I was building it for a jeep and putting aluminum heads on it but lost interest in the project.