Parts needed to finish project
04-04-2011 | 08:11 PM
#1
Thread Starter
Registered
Joined: Oct 2006
Posts: 1,109
Likes: 11
From: Baltimore, MD
Parts needed to finish project
2 non xr imco extension box drive shafts
1 canton marine 10qt oil pan
rpm air gap intakes rectangle port
2 flame arestors
2 red sea strainers
2 bravo nose cones low water pick ups
pm me please
1 canton marine 10qt oil pan
rpm air gap intakes rectangle port
2 flame arestors
2 red sea strainers
2 bravo nose cones low water pick ups
pm me please
04-09-2011 | 09:54 AM
#5
RIPSTA Racing Team
Joined: Nov 2008
Posts: 2,093
Likes: 1
From: Philadelphia, PA
Hull, are you looking for the drive shafts that come with the Stellings boxes with U-joints and flanges on both ends? Or the long straight shafts like the Imco style just longer than stock? I have a set of the Stellings style available. I also have a pair of Gaffrig arresters I think their 3" tall and 8 or 9" round. And a hugh KPM strainer that I had in my old Scarab that handled 2-468 blown BBC no problem 6' round and 18" tall. It has a blue top though and has a polished body.
Last edited by fireboatpilot; 04-09-2011 at 10:00 AM.
04-11-2011 | 08:08 PM
#6
Registered
Joined: Jan 2010
Posts: 382
Likes: 0
From: Folsom CA
