I Need A Pair Of Motors!!
 

PLEASE HELP.I HAVE A 34' CAT THAT I NEED TO FIND A MATCHING PAIR OF MOTORS.NEED THEM TO BE RUNNING AND HOPEFULLY WITH EXHAUST READY TO DROP IN AND GO.I NEED RIGHT AROUND 500-650HP BUT NOT WITH ANY BLOWERS ON THEM DUE TO THE HEIGHT I HAVE IN THE ENGINE COMPARTMENT,I DONT WANT TO HAVE TO PUT SCOOPS ON MY ENGINE HATCH.THANKS. ive been looking in the classifield section and havent found anything good for a good price that arent already sold.

im looking at spending up too 23k but prefer less for a pair fully dresses with exhaust.thank you

interested in 502's with Prochargers? no height issues ...650 hp .....

[email protected]

im interested let me know when you figure out price

Wayne ....nice talking to you ....will be in touch ....m

any other motors out there

im looking at spending up too 23k but prefer less for a pair fully dresses with exhaust.thank you

We have a pair of freshened 605 ci carb to pan.
Crower cranks, Crower rods, Diamond pistons 10:1
Brodix heads and intake, Jesel shaft rockers, Alum pans.

Dyno sheets are little over your requested power but on 93 octane.

573 346 5250
Jim

how much?

12,500 each

What stroke?

4.5

How quick do you need them?

Finishing up a matching pair of 572" tall decks.
single carb,.....dyno at 650 HP

Crower cranks & Rods
JE pistons
Dart pro 1 heads
GM Mark IV blocks
Eickert Pans

Fully dressed

No Exhaust

$12,500 each.



Jon

i need them within the next 30 to 45 days max. please send pictures to [email protected] . or post pics in thread please

thumper can u post pics

Looked on the shop computer but none they are at my house I built them for myself so I didnt take any pictures but I can and will post or e mail them.
Also with payment they can be run for buyer.
Jim

I can't meet your date right now with my current schedule.
Better to let you continue the hunt than to hold you up.

Thanks
jon

Bump!! Looking For Complete Drop In Motors With Exhaust Ready To Go That Arent A Million Dollars

With all do respect is the million dollar comment towards Thumper and myself?

Not looking to insult you or anyone for that matter, but the parts alone to put a good tall deck engine together is 20G each per engine at a minimum.

These engines are torque monsters with out forced induction.
That's the beauty of a tall deck,......torque,.......and torque is what keeps
boats going,......not high rpm HP.

Low rpm big torque is great reliabilty.

So the pricess listed so far are great prices for a tall deck and what your getting just in parts alone,....let alone torque,...reliabilty,...and mild manored engines which makes life around the docks pretty wonderful too.

Talk to Chief, Stotler, Sterling, etc. ........bet your starting price is a minimum of $45,000 each.

Anyways I Truely do wish you well in your search.

Take care
Jon

hey cougar, no was not directed towards or a reply to any of you. im just looking for a good deal on some used motors dont want to spend money on new due to the boat isnt worth all that much. i dont want to spend more on motors then the whole boat and trailers worth.theres acouple deals in classifieds for a pair but they have blowers on them and i cant fit blowers underneath my hatch.

I have a pair of 454's fresh rebuild's Dyno time only! 510 Hp built by ERD racing engine's call me for spec's 13000$
for the pair

Don 631 433-1985

Cougarman thats what I thought as well ?
12500 for 572 - 600 Ci - tall deck, crower,diamond, and jesel vs scat and ???
It is worth it to me but just out of the budget for the build to boat ratio which I do understand.
Good luck on your search
Thumper