I Need A Pair Of Motors!!
04-13-2011 | 09:00 PM
#1
Thread Starter
Registered
Joined: Feb 2010
Posts: 142
Likes: 1
From: orange county, ca
I Need A Pair Of Motors!!
PLEASE HELP.I HAVE A 34' CAT THAT I NEED TO FIND A MATCHING PAIR OF MOTORS.NEED THEM TO BE RUNNING AND HOPEFULLY WITH EXHAUST READY TO DROP IN AND GO.I NEED RIGHT AROUND 500-650HP BUT NOT WITH ANY BLOWERS ON THEM DUE TO THE HEIGHT I HAVE IN THE ENGINE COMPARTMENT,I DONT WANT TO HAVE TO PUT SCOOPS ON MY ENGINE HATCH.THANKS. ive been looking in the classifield section and havent found anything good for a good price that arent already sold.
im looking at spending up too 23k but prefer less for a pair fully dresses with exhaust.thank you
im looking at spending up too 23k but prefer less for a pair fully dresses with exhaust.thank you
Last edited by down2lb; 04-14-2011 at 09:42 PM.
04-13-2011 | 09:25 PM
#2
Registered
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
04-14-2011 | 09:44 PM
#7
Registered
Joined: Apr 2002
Posts: 1,237
Likes: 4
From: Lake of the ozarks
We have a pair of freshened 605 ci carb to pan.
Crower cranks, Crower rods, Diamond pistons 10:1
Brodix heads and intake, Jesel shaft rockers, Alum pans.
Dyno sheets are little over your requested power but on 93 octane.
573 346 5250
Jim
Crower cranks, Crower rods, Diamond pistons 10:1
Brodix heads and intake, Jesel shaft rockers, Alum pans.
Dyno sheets are little over your requested power but on 93 octane.
573 346 5250
Jim
