I may have somthing for ya. Hope to kno next week weather Im going to rebuild or just by new power

kreed, i am 9.5:1 with iron heads, so bolting blowers on is out of the question.

what do you have?

what will you take for your 540's?

it really depends on what i can find to replace them with...if i can go buy a pair of run out motors for cheap, then i will sell my 540's cheaper, if i cant find a replacement, im not going to sell them unless they bring good money.

They are currently 565's W dart heads and Whipples. Made 926 hp @ 5600 rpm but one of the blowers may be shot due to warpage. If I rebuild they are going to be NA 700s

I have a pair of 547 cu in solid roller tunnel ram engines, fully dressed. One is running, the other dropped a valve. Needs a sleeve and some welding on the heads.

These are not exactly virgins, but have lots of good parts.

If interested I can find some more pictures.

Some pics

Transmissions are for sale also

PS - these ran over 90MPH in the old school 42 Cig flat deck they came out of.

Ttt

motors
 

i have a set of 565 ci motors apart not complete and complete 1071 blower packages

two blocks
two rotating assemblies
blowers
four carbs
spark arrestors
intakes
intercoolers
and all belts, pulleys, lines, and linkages
let me know if its something you might be interested in

ken