Wanted; Side by side front motor plates..
11-30-2011 | 10:09 AM
#1
Thread Starter
Registered
Joined: Oct 2008
Posts: 391
Likes: 1
From: Lake Of The Ozarks
Wanted; Side by side front motor plates..
11-30-2011 | 11:14 AM
#2
Charter Member
Joined: Jan 2001
Posts: 7,663
Likes: 2
From: Edgerock Baby!!
I have a pair from a 38 Top Gun, good shape, could use a coat of paint.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
11-30-2011 | 12:08 PM
#3
Thread Starter
Registered
Joined: Oct 2008
Posts: 391
Likes: 1
From: Lake Of The Ozarks
I have a pair from a 38 Top Gun, good shape, could use a coat of paint.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
Merc Part numbers 849310T and 849335T (Note-they are listed for staggered but this was a side by side boat, they are just shaved on the outside to allow more hull clearance if needed. $300 for the pair.
Thanks,
Derek
11-30-2011 | 12:47 PM
#4
Registered
Joined: Mar 2010
Posts: 1,821
Likes: 6
From: morehead n.c
12-01-2011 | 09:30 PM
#6
Charter Member
Joined: Jan 2001
Posts: 7,663
Likes: 2
From: Edgerock Baby!!
Overall width is 27.5 inches. So bolt holes are like 26 or so on center.
