Bravo transom assemble Standard
03-15-2012 | 03:09 PM
#5
Registered
Joined: Dec 2004
Posts: 308
Likes: 0
From: Abingdon, MD
Hey John. Thought you were going to come by the shop to pick one up. We have choice of three, all in nice condition from lift kept boats at $800 a piece and $100 a piece for trim cylinders. Also have a Bravo 1 drive, 1.5 ratio for $1800, several stainless props, a Gen 5 long block for $1200, new Edelbrook torker manifold for $175, Holly marine carb for $200, Merc 420 exhaust manifolds and tails for $500, etc. Give me a call. John 610-299-3598. Thanks
03-15-2012 | 07:24 PM
#7
Registered
Joined: Feb 2005
Posts: 51
Likes: 0
I have a transom assy with Rams in good shape that I am looking for $800. The assy and rams have just about 150 hrs on them. Only issue is a crack on the inner transom plate, that I didn't even know about until it was taken off.
I am repowering and having a HP assy and XR put on it (going from a 502 to a 540). PM me if you would like pictures
I am repowering and having a HP assy and XR put on it (going from a 502 to a 540). PM me if you would like pictures
03-15-2012 | 09:51 PM
#8
Thread Starter
Pirate of the Chesapeake
Joined: Aug 2006
Posts: 4,330
Likes: 0
From: North Point Creek, Md.
transom
I have a transom assy with Rams in good shape that I am looking for $800. The assy and rams have just about 150 hrs on them. Only issue is a crack on the inner transom plate, that I didn't even know about until it was taken off.
I am repowering and having a HP assy and XR put on it (going from a 502 to a 540). PM me if you would like pictures
I am repowering and having a HP assy and XR put on it (going from a 502 to a 540). PM me if you would like pictures
03-16-2012 | 07:43 AM
#10
Platinum Member
Joined: Oct 2007
Posts: 2,256
Likes: 21
From: Osage Beach, Missouri - 28mm
The ones I had in the swap shop sold, but I have a line on some off a 1989 Black Thunder that have less than 100 hours on them. Let me know if your interested I could follow up on them.
