Needing a pair of forged 454 cranks. Thinking someone out there is building some crazy power and pulling out some stock forged genIV cranks to replace with Scat or something. I sure could use them! Let me know what you want for them!

Thanks,

Dustin

ttt

been a while, certainly SOMEONE is building power motors this winter!

Thanks.

i have a few 454 gen 1v cranks

I have 2 2000 502 forged cranks if your interested.

Corbvette - I appreciate it. I need gen IV 454. I have one motor done and plan to just sneak in a forged crank. I have everything (except the crank) for engine #2. We stopped the dyno on engine 1 @ 550HP because if the crank in it. There wasn't much left, but I didn't want to push it. Also don't want to spend the $ for new crank(s) since I am just on the border - new SCAT cranks not necessary.

Builder says a stock forged crank will be fine so long as it is in good condition. A .010 turn and bearings will save me enough to get the 2nd engine done within the budget that it already 4 times the original!