Buddy is putting together a 36 Spectre cat that had #6's going to bravo's. Needs drive line assm, tunnel tab and tie bar. Let me know what you have an include shipping to 65065.

Thanks for the help.

i have two drive lines for bravo out of a 36' scater with bell housings
2000.00 shipped

He will take them. How do you want to handle payment ?

any way u want is ok
ken potter
12001 44th st n
clearwater fl 33762
727-798-7712

Still need tunnel tab and tie bar.

I have Marine Machine Wing plates for Mercury Bravo outdrives and tie bar for twin engine hydraulic set up. This set up is extremely heavy duty with 1 5/16" diameter tie bar that is 54 3/4" center to center. This is perfect for a medium size cat with bravo drives. The tie bar can also be shortened at your local machine shop at minimal expense to fit any twin engine application. Steering rams can be attached outside or inside of the wing plates on this set up. I do not have the long studs to mount them to the bellhousings. Located in Ontario Canada. I will take $500 and you pay actual shipping.