drive indicator part needed ASAP!!!
06-09-2012 | 11:55 AM
#1
Thread Starter
Registered
Joined: Mar 2003
Posts: 2,497
Likes: 4
From: PA/MD
drive indicator part needed ASAP!!!
So, the guy I got my boat from rigged this thing with all thread instead of the front tilt pin that goes through the drive + rams and instead of the round stainless piece that the drive inticator would contact while trimming up or down he used an old outboard water pump cup.
I need that round stainless part that bolts on the tilt pin. Let me know if you have one or know where I can get one PLEASE!!!!
I need that round stainless part that bolts on the tilt pin. Let me know if you have one or know where I can get one PLEASE!!!!
