Need a set of 26 pitch Hydromotive Quad IVs
#3
Registered

Joined: Feb 2006
Posts: 1,826
Likes: 85
From: Tallahassee, FL
I have a set, I can't pull them and send them until next week though as my boat lives an hour and a half away from me.
I just bought them (used) here, they are in very good condition. I used them on 2 runs. I can send pictures if you would like.
They just don't work as well as I hoped on my boat.
I just bought them (used) here, they are in very good condition. I used them on 2 runs. I can send pictures if you would like.
They just don't work as well as I hoped on my boat.
#5
Registered
Joined: Aug 2006
Posts: 1,348
Likes: 1
I have 25P and 26P QVI-X if you needed the X. I have 25P Rev-4's and 26P Bravo I's as well. I'm pretty sure the 26P QVI-X has a solid hub but can't remember off the top of my head.
QIV-X= round ear like Bravo I
QIV= cleaver style
All of them are bone stock props I bought new with around 20 hours on moderate power (300HP outboards) on non-stepped V (low X, no surfacing = low stress).
$699 + shipping from 20646
QIV-X= round ear like Bravo I
QIV= cleaver style
All of them are bone stock props I bought new with around 20 hours on moderate power (300HP outboards) on non-stepped V (low X, no surfacing = low stress).
$699 + shipping from 20646
#7
Please send pics to [email protected].
Non X seems to work better on my boat so far.
Also, I need 1" shaft hubs.
Non X seems to work better on my boat so far.
Also, I need 1" shaft hubs.


