30 bravos
07-26-2012, 07:46 PM
#2
Registered
Join Date: Oct 2004
Location: Cincinnati, Ohio
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
I have some... but
The guy I bought them from told me they were stock and that they had some dings here and there. Well when I got them the first thing I noticed is that the left one looks like it had some lab work done to it, so I ran them the right one (stock) ran out at 5000 rpm the left would only turn around 4900 so I'm guessing it was pitched up some.. Actually they were to big for my power my motors need to be at 53 to 5400 rpm.
They do need to be cleaned up, but I finally found a set of 28's so I don't need these any more. I used them for over a month, I was going to send them to Brett at BBlades and have him lab them to work for my application but I found the 28's so if your interested PM me!!!
Thanks,
Fleg
The guy I bought them from told me they were stock and that they had some dings here and there. Well when I got them the first thing I noticed is that the left one looks like it had some lab work done to it, so I ran them the right one (stock) ran out at 5000 rpm the left would only turn around 4900 so I'm guessing it was pitched up some.. Actually they were to big for my power my motors need to be at 53 to 5400 rpm.
They do need to be cleaned up, but I finally found a set of 28's so I don't need these any more. I used them for over a month, I was going to send them to Brett at BBlades and have him lab them to work for my application but I found the 28's so if your interested PM me!!!
Thanks,
Fleg
