Offshoreonly.com - valve covers

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Wanted (https://www.offshoreonly.com/forums/wanted-244/)

- - valve covers (https://www.offshoreonly.com/forums/wanted/286219-valve-covers.html)

sparky24

10-10-2012 05:47 PM

valve covers

looking for some valve covers taller ones to clear roller rockers. pics required

Sick Stinger

10-10-2012 06:03 PM

Gordon smokin gun has a couple sets nice clean aluminum will clear rockers 100 takes them

GTOKILLER

10-10-2012 06:16 PM

for what engines??

ren3	10-11-2012 09:06 AM

two piece valve covers

I have a pair of two piece cast aluminum polished valve covers for BBC 454. They are made by B & M.

sparky24

10-11-2012 09:07 PM

Quote:

Originally Posted by Sick Stinger (Post 3793709)

Gordon smokin gun has a couple sets nice clean aluminum will clear rockers 100 takes them

any that dont say pat musi on them haha?

Sick Stinger

10-11-2012 09:35 PM

Nope just those but cheap money

C_Spray

10-12-2012 01:22 PM

1 Attachment(s)

I've got two sets of these. Crane 1.7's and Comp Pro rockers will fit under them. One valve cover (shown) has been machined for a breather stack. Make an offer for all four if you're interested. I've also got a set of good used gaskets and the billet cap and breather if you're interested in those.

IOS	10-12-2012 05:57 PM

I have a set for BBC (1.7 ratio roller rockers fit no problem), they are polished aluminum with the breather stacks and the knurled & threaded oil fill . They are the tall Hardin extreme series ( they have them at CP Marine) with one side angled (to clear the exhaust) . If you are interested, I can send you pictures.

C_Spray

10-19-2012 08:29 AM

Are you still interested?

All times are GMT -5. The time now is 04:14 PM.