valve covers
#7
Diamond Member #001
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
I've got two sets of these. Crane 1.7's and Comp Pro rockers will fit under them. One valve cover (shown) has been machined for a breather stack. Make an offer for all four if you're interested. I've also got a set of good used gaskets and the billet cap and breather if you're interested in those.
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#8
Registered
Join Date: Feb 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
I have a set for BBC (1.7 ratio roller rockers fit no problem), they are polished aluminum with the breather stacks and the knurled & threaded oil fill . They are the tall Hardin extreme series ( they have them at CP Marine) with one side angled (to clear the exhaust) . If you are interested, I can send you pictures.
Last edited by IOS; 10-12-2012 at 05:59 PM.