BBC intakes and carbs
 

I am working on a Baja 280 Sport. Complete rebuild of port motor and freshening the top end on the starboard motor. It has two 454 mags that I am running completely stock (cam included) with the only add on being EMI exhaust with the short risers and the rebuilt motor being .30 over on the pistons (starboard motor is still standard bore). Both intakes and carbs have severe corrosion so I am looking for two intakes and carbs to replace them. I am a newbie here so even if you have suggestions of what would work well on this set up I would appreciate the advice. Thanks!!!

I think I have 2 quadrojets and stock manifolds from a 502 I went to holleys and 500 hp high ris I will look in the shop and pm you

i also have 2 alluminum intakes and holley carbs from my 468ci motors . they are in great shape , i removed them to install blowers . 450.00 for all , intakes ,carbs,and flame hats

479 nine three six 4395

If you have any pics could you send them to [email protected] please?? Thanks!!!

i have a nice edelbrock performer rpm air gap intake and performer rpm heads ported to match with an 800 cfm holley very nice set up but only have one of each they are marine parts

Unfortunately I have twins so I need a pair. Thanks!!

well u could buy this stuff at less than half the price new then go buy a set of the same stuff new and it would be like getting 25% off

Lol - someone has to have a pair sitting around they want to get rid of!

2 edelbrock rpm ,square port $150. pair . 2 flame aresters $50. 716 510-4411 dan

Taking a pair of stock 454 mag intakes and quadrajets off my motors now, replacing w/177's. If you are interested I will snap pix and send them to you. They are very clean.