Willcrof10

i would like to find a -2 shorty for a bravo one, a nice steering system imco or anything hydraulic rams and helm or single ram or whatever, or some dart or afr heads for a big block, i have a ton of parts to trade i have a nice top end kit for bbc, i have edelbrock performer rpm marine 6155 heads ported to match an edelbrock performer rpm air gap intake with the split machined down and also machine work done to a 1" spacer this goes with a 4155 holley double pumper 850 cfm it has just been rebuilt, this top end kit is in very good condition with low hours. i also have crane roller rockers and crane stud girdles, i have a 671 gm blower with a thermostat intake, also have a bravo one out drive with the fin snapped off cause someone backed into my boat it only has 50 hrs on it, it came off an 07 baja in 08 so its like new its the newer style, everything i have is in working order and has all been gone through and checked.

pleasen call 9899806437 or pm me

Willcrof10

i also have a callies crank for a big block 4.500 stroke and a mercruiser big block bored .30 over need honed and line bored and crank needs turned

seltzer

Merc 2in lower 0 hours on refresh 1.35 gear not interested in trade. $2500 571 437 -9427

eddie

iTrader: (7)

I have one IMCO 2" lower with bravo upper, 1.50 ratio with 1" IMCO prop shaft and black carrier bearing. All sandblasted and going to get color this week. Not interested in trades. It's currently apart and will be fresh and ready to go.

Willcrof10

please dont comment and say your not interested in trades as this is my only option

adk61

iTrader: (5)

what shape is it in, and how much $$$ you want?

Willcrof10

it spun a rod bearing and turned a main blue needs to be line bored honed and crank needs o be turned ill take 500 for all

seltzer

Check your original thread. WTB= want to buy.
Just trying to help a brother.

fantastixvoyage

iTrader: (1)

Eddie - I might be interested in that drive, let me know how much both built and as it sits. Thanks