4.500 je piston
 

I need one 4.500 flat top piston with the 3cc valve relief (stock stroke and rod length). I have 7 good ones but one with a hole in the top from an intake gasket that was sucked in or not installed right. My pistons have two 1/16 ring grooves and the oil ring is 3/16.


Thanks

I have small dome ones one set you can mill them off $500 for the set

The ones I have are good so I just want to find one to replace the bad one.

Thanks

Still need one piston if anyone has one.

TTT

you can buy just one from j&e.

I looked into that, but figured I would check here before buying new.

Still need a piston if anyone has one.

TTT

What is the rod length . I believe I have 6 4.50 JE for 6.385 rod .

Stock rod length.

I have a full set with VERY LOW hours for $500