Offshoreonly.com

Go Back  Offshoreonly.com > Offshoreonly Marketplace > Wanted
4.500 je piston >

4.500 je piston

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

4.500 je piston

Thread Tools
 
Old 03-11-2013 | 05:06 PM
  #1  
cp5899
Thread Starter
Registered
 
Joined: Jun 2011
Posts: 907
Likes: 4
From: Baton Rouge, La
Default 4.500 je piston
I need one 4.500 flat top piston with the 3cc valve relief (stock stroke and rod length). I have 7 good ones but one with a hole in the top from an intake gasket that was sucked in or not installed right. My pistons have two 1/16 ring grooves and the oil ring is 3/16.


Thanks
cp5899 is offline  
Reply
0
Old 03-11-2013 | 06:51 PM
  #2  
kidapache
Registered
 
Joined: Jan 2008
Posts: 2,610
Likes: 1
Default
Originally Posted by cp5899
I need one 4.500 flat top piston with the 3cc valve relief (stock stroke and rod length). I have 7 good ones but one with a hole in the top from an intake gasket that was sucked in or not installed right. My pistons have two 1/16 ring grooves and the oil ring is 3/16.


Thanks
I have small dome ones one set you can mill them off $500 for the set
kidapache is offline  
Reply
0
Old 03-11-2013 | 09:18 PM
  #3  
cp5899
Thread Starter
Registered
 
Joined: Jun 2011
Posts: 907
Likes: 4
From: Baton Rouge, La
Default
The ones I have are good so I just want to find one to replace the bad one.

Thanks
cp5899 is offline  
Reply
0
Old 03-12-2013 | 07:32 PM
  #4  
cp5899
Thread Starter
Registered
 
Joined: Jun 2011
Posts: 907
Likes: 4
From: Baton Rouge, La
Default
Still need one piston if anyone has one.

TTT
cp5899 is offline  
Reply
0
Old 03-12-2013 | 07:45 PM
  #5  
mike tkach
Registered
15 Year Member
 
Joined: Oct 2007
Posts: 8,439
Likes: 93
From: yorkville,il
Default
you can buy just one from j&e.
mike tkach is offline  
Reply
0
Old 03-12-2013 | 07:49 PM
  #6  
cp5899
Thread Starter
Registered
 
Joined: Jun 2011
Posts: 907
Likes: 4
From: Baton Rouge, La
Default
I looked into that, but figured I would check here before buying new.
cp5899 is offline  
Reply
0
Old 03-16-2013 | 10:34 AM
  #7  
cp5899
Thread Starter
Registered
 
Joined: Jun 2011
Posts: 907
Likes: 4
From: Baton Rouge, La
Default
Still need a piston if anyone has one.

TTT
cp5899 is offline  
Reply
0
Old 03-16-2013 | 06:53 PM
  #8  
TomFTM's Avatar
TomFTM
Platinum Member
25 Year Member
Platinum Member
 
Joined: Dec 2000
Posts: 2,366
Likes: 88
From: Glen Cove ,NY 11542
Default
What is the rod length . I believe I have 6 4.50 JE for 6.385 rod .
TomFTM is offline  
Reply
0
Old 03-16-2013 | 07:02 PM
  #9  
cp5899
Thread Starter
Registered
 
Joined: Jun 2011
Posts: 907
Likes: 4
From: Baton Rouge, La
Default
Stock rod length.
cp5899 is offline  
Reply
0
Old 03-18-2013 | 10:24 PM
  #10  
adrenalinejunkey
Registered
20 Year Member
 
Joined: Mar 2006
Posts: 890
Likes: 22
From: Fall River Ma.
Default
I have a full set with VERY LOW hours for $500
adrenalinejunkey is offline  
Reply
0



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.