I was wondering if anyone has a couple of pieces of 5" diameter exhaust hose laying around that they want to part with? I need them for the divorced collectors on my Lightning headers. Probably only need about 10" total length, or a couple of pieces around 5 inches in length.

Or if someone knows a good source, point me in that direction.

Thanks!

I have a 4' piece in stock

How much do you need for it? Don't kneed that much, but understand if you don't want to sell a smaller section of it. Trouble is, shipping might get expensive across the border.

Thanks.

Are you sure you don't need 4"? I have a 12" piece if you need 4".

No, I have plenty of 4". The Lightning headers that I have take 5" between the header body and the collector. It then reduces down to 4" out the transom. Thanks.

where are you located .I have some I'll give you .I had to buy a 12' piece and didn't use it all.I'll cut off 12" and ship .You pay the shipping tab. You can pm me your address.
BTW I don't think your header is divorced collector but it is what lightning calls an extended dry. They ad on a jacketed extension in an attempt to introduce the water farther downstream. The inner pipe is just a slipjoint with no seal and the outer joins with 5 inch hose

I am in Louisville KY. I can send you a box with a prepaid label if that makes it easier for you. It will probably fit into one of the USPS Priority Mail shoeboxes - we use these at work for shipping stuff all the time. Thanks a bunch!

You are right about the collectors on the headers. Lightning also makes them with the collectors welded on, like a regular header. I am actually adding a silent choice diverter to mmine for the option of running it thru the prop. Cam has 114* overlap, so the longer dry collector is not really needed.

Thanks again,

Tom

Steve (aka "Motor") is The Man! Thanks for helping out a fellow OSO'er. Great guy to deal with!