502 pistons 525EFI
08-12-2013 | 08:54 AM
#1
Thread Starter
Registered
Joined: Aug 2010
Posts: 2,227
Likes: 547
From: Cape Coral FL
502 pistons 525EFI
Looking for a set of standard bore flat top pistons, maybe some 525 takeouts. Must be in perfect condition. Going to raise the compression in my 575.
Also looking for some alum heads. Dart, Brodix, AFR, aprox 325cc or slightly larger runners and a hydraulic roller cam. What do you have? No junk please. I will buy new if necessary.
Also looking for some alum heads. Dart, Brodix, AFR, aprox 325cc or slightly larger runners and a hydraulic roller cam. What do you have? No junk please. I will buy new if necessary.
Last edited by snapmorgan; 08-13-2013 at 11:47 AM.
08-13-2013 | 07:32 PM
#2
Registered
Joined: Jun 2010
Posts: 441
Likes: 0
pistons
I have a set of probe forged pistons that are 4.5" i had them in a 540 only havge dyno time and one trip to the water. they are in great shape 18cc mini domes made 9.5-1 compression in my 540 . pins show nomal wear but u can replace them for less than 50 buck i think. $200 thus the trip
Looking for a set of standard bore flat top pistons, maybe some 525 takeouts. Must be in perfect condition. Going to raise the compression in my 575.
Also looking for some alum heads. Dart, Brodix, AFR, aprox 325cc or slightly larger runners and a hydraulic roller cam. What do you have? No junk please. I will buy new if necessary.
Also looking for some alum heads. Dart, Brodix, AFR, aprox 325cc or slightly larger runners and a hydraulic roller cam. What do you have? No junk please. I will buy new if necessary.
