Looking for 2 sets for a buddy.Large oval port open chamber but closed chamber may work.After market or GM but have to be compatible with today's gas PM me or email [email protected] JOHN SR

Got one set of 049's, $250 plus shipping. If you get the trans from smoking gun we can get them on one pallet.
Heads were on a cruiser that lost an oil pump 10hrs after rebuild.

Red not real up on heads,are they open or closed chamber Think it would be hard to find another set JOHN SR

i have a set from a 98 454 mpi, not sure if they are what you are after but email [email protected] if so.

i have a set,open chaimber,came off of a 1969 427 truck engine,i dont know about compatability with gas.

They are open chamber. I've had 5 sets over the last year and will prob have another set in the next few months.

Have a set of 14092360 oval port heads in Pasadena (MD)

049 ovals are open chamber.It shouldn't be too hard to find another pair of same .

http://www.mortec.com/bbc.htm casting #info

John I sent you a pm , I have a set of 049 that are fresh with new parts ready to go.... call and I will give you the specks. on the springs and the hardware in them.