500hp cam
02-03-2014 | 10:33 PM
#1
Thread Starter
Registered
Joined: Jan 2014
Posts: 577
Likes: 0
From: Keystone lake
500hp cam
Looking for a 500hp camshaft or something close to it for my 502 mag to give a slight upgrade. sorry hp500 efi cam sorry for the confusion.
Last edited by Gh700xx; 02-05-2014 at 11:48 AM.
02-04-2014 | 11:17 AM
#5
Registered
Joined: Jun 2009
Posts: 426
Likes: 0
From: Kirkland, WA
I have a teague stage 2 cam for gen 6, 90 hours on it. It's a variation of the 525 cam.
TCM Camshaft: STAGE 1, GEN VI, HYDRAULIC ROLLER
Operating Range: 2500-6000 RPM
Duration Advertised: 288° Intake / 296° Exhaust
Duration @ .050'' Lift: 226° Intake / 234° Exhaust
Gross Valve Lift: .587 Intake / .610 Exhaust
Lobe Separation Angle: 112°
TCM Camshaft: STAGE 1, GEN VI, HYDRAULIC ROLLER
Operating Range: 2500-6000 RPM
Duration Advertised: 288° Intake / 296° Exhaust
Duration @ .050'' Lift: 226° Intake / 234° Exhaust
Gross Valve Lift: .587 Intake / .610 Exhaust
Lobe Separation Angle: 112°
02-04-2014 | 12:31 PM
#7
Registered
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
