verbi69

I'm looking for a new or nearly new old style XR drive complete, 1.50 ratio.
Will also consider upper and lower units as well if the pricing is right.
Must be dual water pickup.
Please let me know what you have.
Mike
705-665-1098
Cheers!

Need4SpeedGTCS

http://www.doublerperformance.com/in...ravo-i-xr-150-

Mike check this out...

Jake.

mtm

iTrader: (4)

i have a new bravo x upper if that will work for you .

verbi69

Thanks Jake,

The only problem with there site is that some of these items are not updated on a regular basis.

Mike

verbi69

Thanks but need to match the xr's.

RMPRam

iTrader: (1)

I have 2 brand new Mercury XR upper gear sets, if you find that you just need the gears. $1450/set
Gary
612-247-7081

Fenderjack

iTrader: (2)

My friend has aOLD Style XR complete with low water pick up 1:50:1 ratio.Very nice with170 hours.He is asking 4200.00 [email protected]

Biggus

iTrader: (1)

I'd buy a new one. If you do a bit of searching, they can be found for about 6k. XR's have a very short life. Used ones are typically worn out. -Mine are done @ 70-80 hrs.

verbi69

I tend to agree, I put a new one on the port side last fall and should take the same route again.

mosport1

iTrader: (1)

I have a 20 hour XR 1.50 DWP... I bought a 575SCI, HP Transom Assembly, XR package in 2006. I used the engine, sold the transom assembly to a neighbor, and put the 20 hour XR in the box that a new XR I had just bought shortly before had been shipped in. I kept the drive as a spare, but just sold my Bravo boat in March, and now have no use for it.

If you have any interest... [email protected] Thanks, Moss Wells