Anyone have any stainless marine risers/tailpipes that have the 502 mag merc computer box mounting brackets and the bravo shift brackets on them?? mine are the older style for a carb etup and im going efi and need some with brackets. its for a 27 fever with a standard bravo setup. let me know what ya have and pics and price.

Nobody? Somebody's gotta have something.

an aftermarket electronics bracket like one from CP Performance will be cheaper than replacing rises in the long run. Makes for a cleaner look, too.

ill look into that I just didn't want to have to possibly get into the harness and was going for as factory as possible. or if anyone had a 500efi harness bracekts and computer would be fine as well.

GH call Scott at Speed & Custom Marine 850 875 0381
Richard Cuny

I also am putting the 500efi cam in mine so to stop reversion I figure I need some either taller or longer or both tails/risers

That's a myth. I ran the Crane 731 with my standard length SM risers forever with zero issues. Virtually the same specs as the 500efi cam.

really? hhhmmmmm well in that case I may have to rethink my situation then. ill have to see bout an add on bracket or fab me something up then.