Graffic Control Front Pin Bracket Needed
07-20-2014 | 10:23 PM
#1
Thread Starter
Registered
Joined: Jun 2006
Posts: 52
Likes: 0
From: Mars, PA
Graffic Control Front Pin Bracket Needed
[ATTACH=CONFIG]526316[/ATTACH]
I have graffic controls from 1999ish. the throttles and tranny are hooked to the rear of the controls.
I put EFI on the boat and need to change to reverse the throw but all my front hookups do not have the gold braket that attaches with the two phillips
this has holes to hold the pin in 1 of three positions and is a mirror of the rear bracket so I cant just use the rear.
Any idea where to get those brackets I need two.
Any Help would be appreciated !!
I have graffic controls from 1999ish. the throttles and tranny are hooked to the rear of the controls.
I put EFI on the boat and need to change to reverse the throw but all my front hookups do not have the gold braket that attaches with the two phillips
this has holes to hold the pin in 1 of three positions and is a mirror of the rear bracket so I cant just use the rear.
Any idea where to get those brackets I need two.
Any Help would be appreciated !!
