Trying to find more speed in my setup... my prop shaft is 6.25" below currently around 75 mph on a POS prop. With a good wheel i hope to pickup a few more mph, and hoping getting the stock bravo lower up higher instead of trimming to the moon and top of my trim guage will help.... so i'm looking to purchase a -2 or -3 lower for my Bravo to experiment with.

e-mail or PM here... Thanks in advance.

a -3 " lower wont work on a standard bravo upper as the prop will hit the upper thats why imco has a special upper whit a step in it to clear the prop .
some people cut and weld there bravo upper but that would not be my choice .

Thanks for that information.