Need pistons... again.
03-24-2015 | 04:14 PM
#1
Thread Starter
Platinum Member
Joined: Feb 2001
Posts: 4,295
Likes: 1,457
From: Virginia Beach
Need pistons... again.
Back again folks.
The pistons that I got from a fellow OSO'r will not work in my build (they require a shallow groove oil ring... and I'd rather not mix rings). Looking for a set of pistons stamped GM 3999295 or a set of 2399F TRW or equivalent. Four of the GM pistons would be good. Could use a set of Keith Black forged 9:1 pistons instead. Must be for a standard-bore block.
Thanks in advance!
-Tom
The pistons that I got from a fellow OSO'r will not work in my build (they require a shallow groove oil ring... and I'd rather not mix rings). Looking for a set of pistons stamped GM 3999295 or a set of 2399F TRW or equivalent. Four of the GM pistons would be good. Could use a set of Keith Black forged 9:1 pistons instead. Must be for a standard-bore block.
Thanks in advance!
-Tom
