Big Block gen 5 peanut port heads
05-19-2015 | 12:59 PM
#1
Thread Starter
Pirate of the Chesapeake
Joined: Aug 2006
Posts: 4,330
Likes: 0
From: North Point Creek, Md.
Big Block gen 5 peanut port heads
Any one have a running no problem set.Just took the ones of the chris craft they want to much to fix over 500. Got to be a good set out there for far less money. Thanks JOHN SR
05-20-2015 | 10:52 AM
#6
Thread Starter
Pirate of the Chesapeake
Joined: Aug 2006
Posts: 4,330
Likes: 0
From: North Point Creek, Md.
I could use them just pulled a head on the fountain Mark IV looks terrible and has stuck valves.Can they be run as is or they need work.Must be the year for heads. Thanks JOHN SR
05-20-2015 | 10:46 PM
#8
Registered
Joined: Jan 2005
Posts: 3,570
Likes: 127
From: Pasadena, MD
They worked when they came off the motor they were on. May have to put the rockers back on but the valves and springs are still in them. Come and get them. Figure you will have to come over next door to Ft Smallwood park. Pretty flexible on timing. P/M a number when you know.
05-21-2015 | 07:32 AM
#9
Thread Starter
Pirate of the Chesapeake
Joined: Aug 2006
Posts: 4,330
Likes: 0
From: North Point Creek, Md.
