Offshoreonly.com - Small block chevy exhaust manifolds & risers

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Wanted (https://www.offshoreonly.com/forums/wanted-244/)

- - Small block chevy exhaust manifolds & risers (https://www.offshoreonly.com/forums/wanted/328004-small-block-chevy-exhaust-manifolds-risers.html)

JimNut

07-01-2015 03:56 PM

Small block chevy exhaust manifolds & risers

Looking for a set of manifolds & risers for my new sbc i just put together. I have a set of glm but worried about reversion with my new cam. Silent choice is not needed. Open to most brands like EMI or stainless marine. I am on a budget so brand new isn't an option at this point. Let me know what you have. Thanks!

SB	07-01-2015 04:06 PM

See Post #5.
http://www.offshoreonly.com/forums/g...od-choice.html

Captain YARRR

07-01-2015 04:20 PM

Running GLMs with a pair of Hardin Marine custom risers on my 383s with a reasonably aggressive Marine Kinetics cam. So far no complaints.

400 HP each

floatingphil

07-02-2015 08:33 AM

I have a set of SBC Stainless Marine with risers extended 11" for Bravo. $1250.00 plus shipping from Toronto area.

SB	07-02-2015 11:41 AM

I have the exact same (but black) Eddie manifold / riser (short) combo as photo below on 5.7 , Brodix heads, low compression, 218 / 224 .570" / 113LSA installed at 109 ICL cam. Been running many years. No reversion.

http://eddiemarine.com/image/cache/d...eb-500x500.jpg

All times are GMT -5. The time now is 12:46 AM.