Small block chevy exhaust manifolds & risers
#1
Thread Starter
Registered

Joined: Aug 2013
Posts: 96
Likes: 11
From: Metro Detroit, MI
Looking for a set of manifolds & risers for my new sbc i just put together. I have a set of glm but worried about reversion with my new cam. Silent choice is not needed. Open to most brands like EMI or stainless marine. I am on a budget so brand new isn't an option at this point. Let me know what you have. Thanks!
#2
Registered

Joined: Nov 2004
Posts: 14,100
Likes: 3,687
From: On A Dirt Floor
#5
Registered

Joined: Nov 2004
Posts: 14,100
Likes: 3,687
From: On A Dirt Floor
I have the exact same (but black) Eddie manifold / riser (short) combo as photo below on 5.7 , Brodix heads, low compression, 218 / 224 .570" / 113LSA installed at 109 ICL cam. Been running many years. No reversion.




