Different stainless risers or offsets to make mine work Gil/bulldog 500 bbc
#1
Registered
Thread Starter
Join Date: Jun 2011
Location: El Dorado Ks
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Different stainless risers or offsets to make mine work Gil/bulldog 500 bbc
Well first of all it will not let me upload pics so that makes this more difficult but anyway, I have 2 pair of mercruiser bulldog exhaust manifolds with stainless steel risers. My issue is the risers come up and back 9" from my exhaust tips and 4" above them. I planned on using 4" exhaust hose from tailpipe to tip but at that angle and short of distance that will not work. So I am either I search of a different tailpipe set up, or a 4" offset set up I can add to this to make these tailpipes work. They are closed connection where tailpipe meets manifold and water cooled after bend. Thanks and if pictures would help call or text 316 323 9980
#4
Registered
I forget where I bought them from ( gill or rex marine) but they make powder coated steel wedges that fit between manifold and tail pipe to change angle of tailpipe