Looking for bravo xr 1.5 lwp lower unit
#2
Registered

Joined: Nov 2005
Posts: 277
Likes: 0
From: Discovery Bay Ca.
#4
Registered

Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
Why do you want a LWP? Most people hate them because they suck up sand and silt. Unless you are running a really high X there is no need for it.
I have an XR carrier and propshaft that will accept your standard Bravo gears. Have it installed and you will have an XR. There is nothing different from an XR lower case to a standard B1 lower case. Also the gears are also the same, other than cut slightly different to force you spend more for the "XR" gears. They are no stronger.
I have an XR carrier and propshaft that will accept your standard Bravo gears. Have it installed and you will have an XR. There is nothing different from an XR lower case to a standard B1 lower case. Also the gears are also the same, other than cut slightly different to force you spend more for the "XR" gears. They are no stronger.
Last edited by endeavour32; 04-03-2016 at 03:11 PM.
#5
I have one, has a chip in the skeg and corner of cav plate is broken, gears are fine 1000.00 plus shipping.... i can get picsnif you want it. I also have 2 in perfect shape, that are on my boat now 3500.00 each.
#6
Thread Starter
Registered
Joined: Oct 2010
Posts: 712
Likes: 20
From: lake cumberland KY
Why do you want a LWP? Most people hate them because they suck up sand and silt. Unless you are running a really high X there is no need for it.
I have an XR carrier and propshaft that will accept your standard Bravo gears. Have it installed and you will have an XR. There is nothing different from an XR lower case to a standard B1 lower case. Also the gears are also the same, other than cut slightly different to force you spend more for the "XR" gears. They are no stronger.
I have an XR carrier and propshaft that will accept your standard Bravo gears. Have it installed and you will have an XR. There is nothing different from an XR lower case to a standard B1 lower case. Also the gears are also the same, other than cut slightly different to force you spend more for the "XR" gears. They are no stronger.
How much for carrier and shaft????
#7
Thread Starter
Registered
Joined: Oct 2010
Posts: 712
Likes: 20
From: lake cumberland KY
Hey man I'm interested. ...got a deal in works ....I'll get back with ya! Thanks




