Wanted X/XR upper housing
#3
Registered
iTrader: (4)
You know you can have the damage on your drive repaired. All American Drives fixed the same issue with one of my drives and it's holding up great. I also have a doner case I'll sell you cheap if you have a local welder. He can simply cut off the guide plate and weld it on your drive.
#4
Registered
Thread Starter
You know you can have the damage on your drive repaired. All American Drives fixed the same issue with one of my drives and it's holding up great. I also have a doner case I'll sell you cheap if you have a local welder. He can simply cut off the guide plate and weld it on your drive.
#5
Registered
Thread Starter
#7
Registered
Thread Starter
You know you can have the damage on your drive repaired. All American Drives fixed the same issue with one of my drives and it's holding up great. I also have a doner case I'll sell you cheap if you have a local welder. He can simply cut off the guide plate and weld it on your drive.
Some times I'm a idiot, how much for your doner case does it have both of the guide tabs I need to cut them off I own a small foundry and already make the bravo skegs for Hardin CP and KEP I might as well make these also
Thanks