wanted engines,apache 41
 

looking for a pair of engines, trs set up side by side, minimum 420es, drop in ready, could be engine to prop package,,what you got?? my mail [email protected]

Have a pair of 420s in a 39 stinger with BorgWarner trans for TRS no exhaust. Ran great when we put it away.

sounds interesting..pics and prices..smile

Which 41 do you have ??

My friend and i bought in Ibiza back in 06-07 , he had a motorcycle accident, and it has been sitting for many years , the wife sold all the parts ..I finally got the hull..1987 but it has an arm rest on the back seat in the middle .never seen it before..it used to be red and a little pink..would like to know the historie..only 1 hatch on the foredeck

]Don't have any pics the boat is in my storage yard with stuff stacked on the engine hatch so nothing disappears. I do have the gill exhaust that I might let go with the engines 5k each with trans and exhaust.

[ATTACH=CONFIG]562685[/ATTACH] this is the exhaust off the motors this is the motor I built for the new 26 LS speedster I built. the 420s look similar blue valve covers etc.

Im very interested,how long have they been sitting..as long as it has good compression,no leaks on exhaust etc..how do we go from here..

I have motors assemblies trans and drive plus steering all TRS

A couple of years they are complete motor bellhousings to trans with TRS plug ins. If you are interested you can send a deposit and we will set them up on the run stand and fire them up for you to see them running complete. them we can create them up and ship where ever you want. Regards Dan call me 949-646-9778

anything to do on the price
 

Hi anything to do on price

420`s in a 41 Apache? Will that even get on plane?? :D


I think it deserves some better power :

http://www.offshoreonly.com/forums/s...ci-motors.html

All there is on the boat is fiberglass , so have to start from scratch..i know it needs bigger power ..will let you know if it goes on plane ..smile

I think that's more than a fair price if I break them down I could get a lot more.

$10k for a pair of running drop in engines with thansmissions and Gil exhaust????
That's a steal!!!!!!!!
Don't wait too long to lock that deal up or someone else will

Any use for kiekhaefer Mercury racing big tabs 450 S twin rams brand new in the box

Hi Any transoms and trs drives..

Whats the Azz of that Apache cut for ?? trs........would someone actually do that....................... I have some ssm #3's and transom assemblies, inner and out plates included

Hi is it the same cut out for ssm 3 and trs ..I know the transoms are different..only thing is props here in europe for the ssm 3 are hard to find..

ssm 3 is a different transom cut than trs

And what is an ssm 3 with plates worth?

May have a set of SSM 3 drives props assemblies ect

I have TRS drives trannies transom tie bar bellhousing as of right now

Hi what price are we talking..need to ship them to europe..props are kind of expensive on those or can i use the adapter from 19-26 spline..

Number 3 are 19 spline . You can get 26 some adapters if you wanted to open up the prop window more. Looking around 6500 for a complete 3 set up
Drives transoms trans bells torque plates

Hi ok to understand this right the 3 is 19 spline and 3a is 26 spline..they stuff you have does mean i can bolt up to any BBC.. i thought my cut outs was for trs but can see they are for ssm..any pics and condition..

3/4 19 spline unless 4 big shaft 26 spline
3A/5 is 26 spline.
BBC sbc all have the same bellhousing pattern so yes it bolts up to any Chevy V8
I'll do my best to get pics. Condition is good. I have 0 info on hours thought. Came off running but that's all I know.

ok whats the gear ratio.. 41 apache pleasure full cabin ..ssm 3 ..500 hp maybe 600 hp..any idea on speed.. and prop size.. sorry for all the qustions but sounds like you know a lot about it..happy new year

Id need to check. They are not mine I was looking to buy them on a boat rigged with 3s. Takes a lot to get them going. Last I knew the chef if with 750s?? Ran 75.

Any news ..Im in the process of buying some 690 hp in NJ ..could be fine to lock things up so i can ship them at the same time

waiting on a reply from the guy. im going to guess buy the set up they were 1.48/1

Hi ..any news on those ssm3 and gimbles etc..closing the deal tomorrow on the engines..

Best he knows they are 1.48
I'm headed to NJ Saturday afternoon can drop off

I need a couple of pics..what trannies are they..bam ?..the smm3 is it with or without crescent,,they engines im buying used to have Bam 900 ..is everything gonna hook up..what about drive gaskets etc can you get hold of that..
B regards
leif

Then are 72C trans
Everything hooks up the same ban just mods trans they don't cast there own. Non crescent
Drive gaskets are easy enough attenable

The ssm3's that I have are crescent lowers

Any pics,price,gimbles trannies

Im trying to get some pics, all this stuff is at my lake house 4 hours away from me.

Ok what do you have ?condition?price ? Im looking at some in hamburg

SSM #3 R & L drives, inner and out transom assemblies and a pair of cleaver props

Price..no trannies