WTB Weiand 177 -Drive Gear (Right)
#1
Thread Starter
Registered
Joined: Jan 2018
Posts: 198
Likes: 0
Hoping someone has a Weiand 177 that might have had some issue and would sell me a good right side drive gear, the one, the snout shaft bolts to. It's the one marked RIGHT in the picture with the 4 holes. I ONLY need the right gear.
A "Good" gear will have almost NO gear lash on the internal threads/rotor shaft where the gear mounts on the rotor shaft while it's shimmed out.070"-.080" and of course the outside teath are not worn or damaged and don't have more than a couple thousandths lash.
Please PM me and let me know what you have.
Thanks
A "Good" gear will have almost NO gear lash on the internal threads/rotor shaft where the gear mounts on the rotor shaft while it's shimmed out.070"-.080" and of course the outside teath are not worn or damaged and don't have more than a couple thousandths lash.
Please PM me and let me know what you have.
Thanks
Last edited by Mohavvalley; 03-02-2018 at 08:52 PM.



