|
Char-Lynn angled shims
Looking for the angled bezel or angle cut aluminum shins that adjust the helm to dash relationship. I know there old school but I don’t have 1K for a tilt column! Thanks. |
Are these the horse shoe shaped shims that go in the auto steering column
|
Sounds like they would work. Two are needed (one one each side of the dash) so the bolts go into the helm straight. Any pics of what you have? |
I'll check when I get home, I think I have a couple in a old cooler full of auto parts I've been dragging around for 30 yrs
You may want to check with McMaster Carr also, |
There is a guy in MI who's will machine anything you need. Name os Derrick. I have his contact info. He is a member here also. |
I had to make one. Machined for the front and just glassed in a wood wedge on the back. To get something like 10* it adds 3" to the thickness of the dash, so you may need a spacer for the steering shaft also. I will see if i can find a pic of the spacer for you.
|
thanks to all, the more info the better! |
Originally Posted by Btrhd
(Post 4623432)
Looking for the angled bezel or angle cut aluminum shins that adjust the helm to dash relationship. I know there old school but I don’t have 1K for a tilt column! Thanks. https://cimg9.ibsrv.net/gimg/www.off...a81e8a536.jpeg |
https://cimg8.ibsrv.net/gimg/www.off...2147208f8c.jpg
I screwed it to the bottom of my existing shim.... https://cimg7.ibsrv.net/gimg/www.off...dd9277fd38.jpg You can kinda see the line on the bottom where the shim is attached |
| All times are GMT -5. The time now is 01:49 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.