Offshoreonly.com - Hydraulic roller camshafts (2)

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Wanted (https://www.offshoreonly.com/forums/wanted-244/)

- - Hydraulic roller camshafts (2) (https://www.offshoreonly.com/forums/wanted/353796-hydraulic-roller-camshafts-2-a.html)

Rookie

05-06-2018 10:03 PM

Hydraulic roller camshafts (2)

Looking for 2 decent HR camshafts to upgrade over merc 420 flat tapper for 2 454 budget builds I have,
Let me know what you have laying around.

fastenuff2

05-07-2018 06:47 PM

Quote:

Originally Posted by Rookie (Post 4625158)

Looking for 2 decent HR camshafts to upgrade over merc 420 flat tapper for 2 454 budget builds I have,
Let me know what you have laying around.

I have one 600sci cam,lifters,and rocker set up 200 hours for 600 dollars perfect condition

snapmorgan

05-07-2018 07:05 PM

I have a pair of 248/254 .646 on 114 stepped nose cams.

TomR	05-07-2018 07:48 PM

I have two sets of CompCams Short travel hydraulic roller lifters with approximately 25 hrs on them. text me 508-237-3326 if your interested

Rookie

05-08-2018 01:00 PM

Quote:

Originally Posted by fastenuff2 (Post 4625291)

I have one 600sci cam,lifters,and rocker set up 200 hours for 600 dollars perfect condition

Thanks, A little light on cam for what I am looking for.

Quote:

Originally Posted by snapmorgan (Post 4625296)

I have a pair of 248/254 .646 on 114 stepped nose cams.

Thanks, A little heavy on cam for what I am looking for.
Looking for something 228-236 area.

wzguy

05-21-2018 03:38 PM

Call john has two 224 230 out of gen 6 502 not sure if step or not. Looking for dart like intake for tall deck if you know of any. Thanks leo

SB	05-21-2018 09:01 PM

Quote:

Originally Posted by Rookie (Post 4625454)

Looking for something 228-236 area.

Don't see that making much more power over the 420HP flat tappet. But that is IMHO.

Here is the OEM cam:
http://www.cranecams.com/product/car...detail&p=24005

Rookie

05-22-2018 10:15 PM

Quote:

Originally Posted by wzguy (Post 4627647)

Call john has two 224 230 out of gen 6 502 not sure if step or not. Looking for dart like intake for tall deck if you know of any. Thanks leo

Thanks, I'll contact him.
I'll also look around Valako's shop. I think I saw one there, probably a short deck. If you do find a short deck intake I have some spacers to fit it to a tall deck if you need them.

Rookie

05-22-2018 10:22 PM

Quote:

Originally Posted by SB (Post 4627700)

Don't see that making much more power over the 420HP flat tappet. But that is IMHO.

Here is the OEM cam:
H-228/312-2S-14 T1.2 Hydraulic Flat Tappet Camshaft for Chevrolet 1967-1995 V-8, 396-454

Cam specs being the same. I believe with the profile of the the roller... the valves should open quicker, stay at max lift longer, higher lift available and close faster. It's like adding some duration. Also, I have full setup for hyd roller and would like to not purchase hyd flat tappets.

All times are GMT -5. The time now is 12:24 PM.