Hydraulic roller camshafts (2)

Reply Subscribe

Thread Tools

05-06-2018 | 10:03 PM

Rookie

Thread Starter

Registered

Joined: Jan 2003

Posts: 6,019

Likes: 1,521

From: Grand Rapids, MI

Hydraulic roller camshafts (2)

Looking for 2 decent HR camshafts to upgrade over merc 420 flat tapper for 2 454 budget builds I have,
Let me know what you have laying around.

05-07-2018 | 06:47 PM

fastenuff2

Registered

Joined: Sep 2016

Posts: 34

Likes: 7

From: freeburg illinois

Quote:

Originally Posted by Rookie

Looking for 2 decent HR camshafts to upgrade over merc 420 flat tapper for 2 454 budget builds I have,
Let me know what you have laying around.

I have one 600sci cam,lifters,and rocker set up 200 hours for 600 dollars perfect condition

05-07-2018 | 07:05 PM

snapmorgan

Registered

Joined: Aug 2010

Posts: 2,227

Likes: 547

From: Cape Coral FL

I have a pair of 248/254 .646 on 114 stepped nose cams.

05-07-2018 | 07:48 PM

TomR

Registered

Joined: Dec 2000

Posts: 1,340

Likes: 28

From: Harwich, MA

I have two sets of CompCams Short travel hydraulic roller lifters with approximately 25 hrs on them. text me 508-237-3326 if your interested

05-08-2018 | 01:00 PM

Rookie

Thread Starter

Registered

Joined: Jan 2003

Posts: 6,019

Likes: 1,521

From: Grand Rapids, MI

Quote:

Originally Posted by fastenuff2

I have one 600sci cam,lifters,and rocker set up 200 hours for 600 dollars perfect condition

Thanks, A little light on cam for what I am looking for.

Quote:

Originally Posted by snapmorgan

I have a pair of 248/254 .646 on 114 stepped nose cams.

Thanks, A little heavy on cam for what I am looking for.
Looking for something 228-236 area.

05-21-2018 | 03:38 PM

wzguy

Registered

Joined: Feb 2010

Posts: 73

Likes: 0

From: gun lake shelbyville mi.

Call john has two 224 230 out of gen 6 502 not sure if step or not. Looking for dart like intake for tall deck if you know of any. Thanks leo

05-21-2018 | 09:01 PM

Registered

Joined: Nov 2004

Posts: 14,100

Likes: 3,687

From: On A Dirt Floor

Quote:

Originally Posted by Rookie

Looking for something 228-236 area.

Don't see that making much more power over the 420HP flat tappet. But that is IMHO.

Here is the OEM cam:
http://www.cranecams.com/product/car...detail&p=24005

Last edited by SB; 05-21-2018 at 09:08 PM.

05-22-2018 | 10:15 PM

Rookie

Thread Starter

Registered

Joined: Jan 2003

Posts: 6,019

Likes: 1,521

From: Grand Rapids, MI

Quote:

Originally Posted by wzguy

Call john has two 224 230 out of gen 6 502 not sure if step or not. Looking for dart like intake for tall deck if you know of any. Thanks leo

Thanks, I'll contact him.
I'll also look around Valako's shop. I think I saw one there, probably a short deck. If you do find a short deck intake I have some spacers to fit it to a tall deck if you need them.

05-22-2018 | 10:22 PM

Rookie

Thread Starter

Registered

Joined: Jan 2003

Posts: 6,019

Likes: 1,521

From: Grand Rapids, MI

Quote:

Originally Posted by SB

Don't see that making much more power over the 420HP flat tappet. But that is IMHO.

Here is the OEM cam:
H-228/312-2S-14 T1.2 Hydraulic Flat Tappet Camshaft for Chevrolet 1967-1995 V-8, 396-454

Cam specs being the same. I believe with the profile of the the roller... the valves should open quicker, stay at max lift longer, higher lift available and close faster. It's like adding some duration. Also, I have full setup for hyd roller and would like to not purchase hyd flat tappets.